About this video: Section 6.5.2 Exterior of the ComSOP requires inspectors to identify the type of siding on a building and inspect the siding, flashing and trim. Commercial buildings may…
About this video: A mansard roof is a roof that rises by inclined planes from all four sides of a building. The sloping roofs on all four sides have two…
About this video: Join Dillon Winiecki as he inspects a spray polyurethane foam (SPF) roof. SPF coating is applied by spraying a liquid onto the existing roof and allowing it…
About this video: Join Dillon Winiecki as he discusses how to approach inspecting rooftop solar at commercial buildings following the International Standards of Practice for Inspecting Commercial Properties (ComSOP). The…
About this video: Join Rob Claus as he assesses a fixed ladder during a commercial property inspection to safely access a low-slope roof. A fixed ladder is defined as a…
About this video: Loading docks are listed in the ComSOP under the Doors, Windows, and Interior Section 6.5.11. The main items to keep in mind are: Inspectors should inspect all…
About this video: Follow along as we inspect a vacant warehouse according to the International Standards of Practice for Inspecting Commercial Properties (ComSOP). Our inspection begins with a thorough examination…
About this video: The ComSOP outlines the electrical items that the inspector is required to inspect and not required to inspect in Section 6.5.8. This video demonstrates a ComSOP electrical…
About this video: Transformers are necessary whenever the power supply has to be changed to accommodate a different current load. They are generally located next to a panelboard that requires…
About this video: The ComSOP inspection requirements for panelboards include: Report on any unused circuit-breaker panel openings that are not filled. Report on absent or poor labeling. Inspect panelboards and…
About this video: The main service disconnect is a means for disconnecting the building from the utility supply. This is typically in the form of a breaker or lever depending…
About this video: Here are the key terms to know: Working space: The front clearance, side clearance, and height clearance requirements for electrical equipment that provide a safe area for…