Inspecting Transformers
Transformers are used to change AC voltage levels. These can be termed as step-up or step-down, depending upon the need to increase or decrease in the voltage level. This is…
Transformers are used to change AC voltage levels. These can be termed as step-up or step-down, depending upon the need to increase or decrease in the voltage level. This is…
Section 6.5.2 of the ComSOP titled Exterior states that the inspector should inspect the landscaping during a commercial property inspection. Contrarily, InterNACHI’s Home Inspection Standards of Practice exclude landscaping from…
You must be logged in to access this page. Username or E-mail Password * Remember Me Forgot Password Not a member? Join CCPIA today!
Section 6.5.2 of the ComSOP titled Exteriors states that the inspector should inspect the stormwater drainage system, general topography, and parking area. To complete this part of the inspection, the…
There are two types of air-handling systems: constant volume (CV), and variable air volume (VAV). In a CV system, a constant amount of air flows through the system whenever it…
Concrete masonry blocks with an architectural or rough stone surface are called split-face blocks. The face of these blocks has an irregular, rough texture, as if the surface of the…
Exterior lighting has various purposes. It can be an accent feature in landscaping and pathways, a safety feature around exit doors, and a security feature at the building’s exterior and…
Concrete tilt-up panels have become a common method of construction across North America. Tilt-up concrete buildings are commonly used as warehouses, strip malls, and light industrial facilities. The engineered concrete…